-
The automatic CNC lathe parts are programmed. After the good tool, it is necessary to carry out trial and error debugging.
-
1. Fully enclosed, no pipelines exposed, neat and beautiful.
2. The servo motor's rapid feed rate can reach 20 m / min.
-
The rigidity of the machine tool is good, and it is not easy to cause vibration. The cross-sectional area of the CNC lathe is much larger than that of the flat bed of the same specification
-
The economical CNC lathe adopts the stepping motor and the single-chip microcomputer to transform the feeding system of the ordinary lathe into a simple CNC lathe, which has lower cost, but the degree of automation and function are relative
-
The experience of CNC lathe manufacturers has learned that the position loop is bad and causes the output voltage to be unstable; the vibration caused by the poor speed loop;
-
When processing on a small CNC lathe, the program is based on the part drawing program. The programming code and command pattern mostly conform to the ISO standard and the corresponding national specifications.
-
Talking about the High Precision Machining Technology of Shandong CNC Lathe
-
In addition to the industry standard, the small CNC lathes produced in China have the advantages of small CNC lathes.
-
After finding the problem of numerical control lathe, even if the local position has been found, it should not be repaired blindly. First,
-
In order to prevent rust, the sliding surface of the CNC lathe and some metal parts are coated with rust inhibitor.
-
The CNC lathe is mainly composed of a machining program carrier, a numerical control device, a servo system, a machine tool body and other auxiliary devices.
-
Orientation angle running is generally caused by a collision machine, or the spindle synchronous tooth shape brings out a problem, resulting in an error in the orientation angle,
